How to exit from ForEach-Object in PowerShell

I have the following code:

$project.PropertyGroup | Foreach-Object { if($_.GetAttribute('Condition').Trim() -eq $propertyGroupConditionName.Trim()) { $a = $project.RemoveChild($_); Write-Host $_.GetAttribute('Condition')"has been removed."; } }; 

Question #1: How do I exit from ForEach-Object? I tried using "break" and "continue", but it doesn't work.

Question #2: I found that I can alter the list within a foreach loop... We can't do it like that in C#... Why does PowerShell allow us to do that?

10 Answers

First of all, Foreach-Object is not an actual loop and calling break in it will cancel the whole script rather than skipping to the statement after it.

Conversely, break and continue will work as you expect in an actual foreach loop.

Item #1. Putting a break within the foreach loop does exit the loop, but it does not stop the pipeline. It sounds like you want something like this:

$todo=$project.PropertyGroup foreach ($thing in $todo){ if ($thing -eq 'some_condition'){ break } } 

Item #2. PowerShell lets you modify an array within a foreach loop over that array, but those changes do not take effect until you exit the loop. Try running the code below for an example.

$a=1,2,3 foreach ($value in $a){ Write-Host $value } Write-Host $a 

I can't comment on why the authors of PowerShell allowed this, but most other scripting languages (Perl, Python and shell) allow similar constructs.

There are differences between foreach and foreach-object.

A very good description you can find here: MS-ScriptingGuy

For testing in PS, here you have scripts to show the difference.

ForEach-Object:

# Omit 5. 1..10 | ForEach-Object { if ($_ -eq 5) {return} # if ($_ -ge 5) {return} # Omit from 5. Write-Host $_ } write-host "after1" 

# Cancels whole script at 15, "after2" not printed. 11..20 | ForEach-Object { if ($_ -eq 15) {continue} Write-Host $_ } write-host "after2" 

# Cancels whole script at 25, "after3" not printed. 21..30 | ForEach-Object { if ($_ -eq 25) {break} Write-Host $_ } write-host "after3" 

foreach

# Ends foreach at 5. foreach ($number1 in (1..10)) { if ($number1 -eq 5) {break} Write-Host "$number1" } write-host "after1" 

# Omit 15. foreach ($number2 in (11..20)) { if ($number2 -eq 15) {continue} Write-Host "$number2" } write-host "after2" 

# Cancels whole script at 25, "after3" not printed. foreach ($number3 in (21..30)) { if ($number3 -eq 25) {return} Write-Host "$number3" } write-host "after3" 

To stop the pipeline of which ForEach-Object is part just use the statement continue inside the script block under ForEach-Object. continue behaves differently when you use it in foreach(...) {...} and in ForEach-Object {...} and this is why it's possible. If you want to carry on producing objects in the pipeline discarding some of the original objects, then the best way to do it is to filter out using Where-Object.

Since ForEach-Object is a cmdlet, break and continue will behave differently here than with the foreach keyword. Both will stop the loop but will also terminate the entire script:

break:

0..3 | foreach { if ($_ -eq 2) { break } $_ } echo "Never printed" # OUTPUT: # 0 # 1 

continue:

0..3 | foreach { if ($_ -eq 2) { continue } $_ } echo "Never printed" # OUTPUT: # 0 # 1 

So far, I have not found a "good" way to break a foreach script block without breaking the script, except "abusing" exceptions, although powershell core uses this approach:

throw:

class CustomStopUpstreamException : Exception {} try { 0..3 | foreach { if ($_ -eq 2) { throw [CustomStopUpstreamException]::new() } $_ } } catch [CustomStopUpstreamException] { } echo "End" # OUTPUT: # 0 # 1 # End 

The alternative (which is not always possible) would be to use the foreach keyword:

foreach:

foreach ($_ in (0..3)) { if ($_ -eq 2) { break } $_ } echo "End" # OUTPUT: # 0 # 1 # End 

Below is a suggested approach to Question #1 which I use if I wish to use the ForEach-Object cmdlet. It does not directly answer the question because it does not EXIT the pipeline. However, it may achieve the desired effect in Q#1. The only drawback an amateur like myself can see is when processing large pipeline iterations.

 $zStop = $false (97..122) | Where-Object {$zStop -eq $false} | ForEach-Object { $zNumeric = $_ $zAlpha = [char]$zNumeric Write-Host -ForegroundColor Yellow ("{0,4} = {1}" -f ($zNumeric, $zAlpha)) if ($zAlpha -eq "m") {$zStop = $true} } Write-Host -ForegroundColor Green "My PSVersion = 5.1.18362.145" 

I hope this is of use. Happy New Year to all.

If you insist on using ForEach-Object, then I would suggest adding a "break condition" like this:

$Break = $False; 1,2,3,4 | Where-Object { $Break -Eq $False } | ForEach-Object { $Break = $_ -Eq 3; Write-Host "Current number is $_"; } 

The above code must output 1,2,3 and then skip (break before) 4. Expected output:

Current number is 1 Current number is 2 Current number is 3 

I found this question while looking for a way to have fine grained flow control to break from a specific block of code. The solution I settled on wasn't mentioned...

Using labels with the break keyword

From: about_break

A Break statement can include a label that lets you exit embedded loops. A label can specify any loop keyword, such as Foreach, For, or While, in a script.

Here's a simple example

:myLabel for($i = 1; $i -le 2; $i++) { Write-Host "Iteration: $i" break myLabel } Write-Host "After for loop" # Results: # Iteration: 1 # After for loop 

And then a more complicated example that shows the results with nested labels and breaking each one.

:outerLabel for($outer = 1; $outer -le 2; $outer++) { :innerLabel for($inner = 1; $inner -le 2; $inner++) { Write-Host "Outer: $outer / Inner: $inner" #break innerLabel #break outerLabel } Write-Host "After Inner Loop" } Write-Host "After Outer Loop" # Both breaks commented out # Outer: 1 / Inner: 1 # Outer: 1 / Inner: 2 # After Inner Loop # Outer: 2 / Inner: 1 # Outer: 2 / Inner: 2 # After Inner Loop # After Outer Loop # break innerLabel Results # Outer: 1 / Inner: 1 # After Inner Loop # Outer: 2 / Inner: 1 # After Inner Loop # After Outer Loop # break outerLabel Results # Outer: 1 / Inner: 1 # After Outer Loop 

You can also adapt it to work in other situations by wrapping blocks of code in loops that will only execute once.

:myLabel do { 1..2 | % { Write-Host "Iteration: $_" break myLabel } } while ($false) Write-Host "After do while loop" # Results: # Iteration: 1 # After do while loop 

There is a way to break from ForEach-Object without throwing an exception. It employs a lesser-known feature of Select-Object, using the -First parameter, which actually breaks the pipeline when the specified number of pipeline items have been processed.

Simplified example:

$null = 1..5 | ForEach-Object { # Do something... Write-Host $_ # Evaluate "break" condition -> output $true if( $_ -eq 2 ) { $true } } | Select-Object -First 1 # Actually breaks the pipeline 

Output:

1 2 

Note that the assignment to $null is there to hide the output of $true, which is produced by the break condition. The value $true could be replaced by 42, "skip", "foobar", you name it. We just need to pipe something to Select-Object so it breaks the pipeline.

You have two options to abruptly exit out of ForEach-Object pipeline in PowerShell:

1. Apply exit logic in Where-Object first, then pass objects to Foreach-Object, or
2. (where possible) convert Foreach-Object into a standard Foreach looping construct.

Let's see examples: Following scripts exit out of Foreach-Object loop after 2nd iteration (i.e. pipeline iterates only 2 times)":

Solution-1: use Where-Object filter BEFORE Foreach-Object:

[boolean]$exit = $false; 1..10 | Where-Object {$exit -eq $false} | Foreach-Object { if($_ -eq 2) {$exit = $true} #OR $exit = ($_ -eq 2); $_; } 

OR

1..10 | Where-Object {$_ -le 2} | Foreach-Object { $_; } 

Solution-2: Converted Foreach-Object into standard Foreach looping construct:

Foreach ($i in 1..10) { if ($i -eq 3) {break;} $i; } 

PowerShell should really provide a bit more straightforward way to exit or break out from within the body of a Foreach-Object pipeline. Note: return doesn't exit, it only skips specific iteration (similar to continue in most programming languages), here is an example of return:

Write-Host "Following will only skip one iteration (actually iterates all 10 times)"; 1..10 | Foreach-Object { if ($_ -eq 3) {return;} #skips only 3rd iteration. $_; } 

HTH

Answer for Question #1 - You could simply have your if statement stop being TRUE

$project.PropertyGroup | Foreach { if(($_.GetAttribute('Condition').Trim() -eq $propertyGroupConditionName.Trim()) -and !$FinishLoop) { $a = $project.RemoveChild($_); Write-Host $_.GetAttribute('Condition')"has been removed."; $FinishLoop = $true } };